WELLDONE CHEMICAL
11
Viscosity Reducer for Thick Oil
❤ Add to collection

Viscosity Reducer for Thick Oil

Item:water soluble/oil soluble
Appearance:homogeneous liquid,no impurities
Solubility:soluble in water to form a uniform transparent body or a uniform emulsion, stand for 2 hours without delamination
pH:7.0-9.0
Emulsion State:oil droplets evenly dispersed in water, no transparent water layer
Natural Sedimentation Dehydration Rate:≥80%

0.00
0.00
¥0.00
¥0.00
Weight:0.00KG
Description

Item:water soluble/oil soluble
Appearance:homogeneous liquid,no impurities
Solubility:soluble in water to form a uniform transparent body or a uniform emulsion, stand for 2 hours without delamination
pH:7.0-9.0
Emulsion State:oil droplets evenly dispersed in water, no transparent water layer
Natural Sedimentation Dehydration Rate:≥80%


Item

Index

water soluble

oil soluble

Appearance

homogeneous liquid,

no impurities

homogeneous liquid,

 no     impurities

Solubility

soluble in water to form a uniform transparent     body or a uniform emulsion, stand for 2 hours without delamination

soluble in kerosene or xylene

pH

7.0-9.0

/

Closed Flash Point,℃

/

90

Viscosity Reduction Rate

Crude Oil Viscosity

Mpa·s

<10000

≥98.0%

≥85%

10000-50000

≥99.0%

>50000

≥99.5%

≥90%

Emulsion State

oil droplets evenly dispersed in water, no     transparent water layer

/

Natural Sedimentation Dehydration Rate

≥80%

/

Organochlorine Content

0



 


Advantages:


1. The new high-efficiency extra-heavy oil/ultra-heavy oil emulsification   viscosity reduction technology can be used to reduce the viscosity of the   wellbore partly to replace the wellbore electric heating and reduce power   consumption; it can also be combined with the wellbore thin oil mixing   technology to reduce the amount of thin oil or completely replace the   wellbore mixing Thin oil process.


2. For oil wells where thermal   recovery by steam injection fails to meet the economic recovery conditions,   the new high-efficiency extra-heavy oil/ultra-heavy oil water-based viscosity   reducer is formulated into a viscosity reducer aqueous solution and squeezed   into the oil layer, which can clean and release the oil film on the rock   surface to increase the reservoir At the same time, it can form an   oil-in-water emulsion to reduce the viscosity of crude oil, so that the heavy   oil can be successfully extracted from the ground, realize the cold recovery   of super heavy oil, and reduce the cost of oil recovery.


3. The new high-efficiency extra-heavy   oil/ultra-heavy oil water-based viscosity reducer has good temperature   resistance, and can be used in combination with steam stimulation and steam   flooding technologies to reduce gas injection pressure, increase oil well   production and block recovery.


      

Viscosity Reducer for Thick Oil

Prev: None
Next: None
  • Polyamine Flocculant Sludge Dewatering Chemicals Cycloaliphatic Polyamine Curing Agent
  • Wastewater Treatment Chemical Industry 26062-79-3 Cationic Polyelectrolyte Polydadmac
  • Xanthan Gum Oil Drilling Grade Price Cas 11138-66-2 Thickener Powder Raw Material Additive Industrial Grade
  • Viscosity Reducer for Thick Oil
  • Anionic Polyacrylamide for Industrial Waste Water Treatment
  • Water Treatment Granular Anionic Polyacrylamide
  • Anionic polyacrylamide (APAM)
  • Anionic Polyacrylamide Flocculant
  • Waste Water Treatment Agents Anionic APAM for Dyeing Water
  • Anionic Polyacrylamide Flocculant (APAM)